How to Get a Toyota Replacement Key
If your Toyota key fob isn't functioning correctly, you might need a new battery. It's easy to open the case and insert a flat tool such as a screwdriver. Replace the old battery with a new one after carefully removing the old one.
It's not a full solution, but it can get you back on the road. Contact us for any questions about our Key Replacement Protection, which is available as part of our Tire and Wheel Protection plan.
How do I obtain a replacement key
We've all lost keys. It's not always as complicated as retracing steps and checking the locations where you normally leave keys. In other instances, you could have a more serious problem like the key fob isn't working or even worse even lost completely. If your key fob does not work, it could require replacement batteries or changing the program. There are a few things you can do to find an Toyota key replacement for your vehicle, truck, or SUV.
First, determine if it was lost. If it is been lost, bring a blank key to your local Toyota dealership and have it cut. You will need to provide evidence of ownership, such as your registration or insurance card. If you don't have these the dealer will need to determine your key code from the vehicle's VIN number. This will stop thieves from hot-wiring your vehicle and then stealing it.
If you're unable to locate your key, try using an app to locate it. The Toyota Key Finder App is available for all of the latest models of the Toyota brand. It utilizes Bluetooth(r) which allows your key to emit a signal that can be detected by your tablet or smartphone. The signal is strong enough to be detected by your phone, but it isn't enough to cause interference with other devices at the office or at home.
You can also take your key fob to an electronics store or automotive parts distributor to get it repaired. These places are usually able to program an entirely new Toyota key and also have the part in stock. You may also be required to show some form of identification, depending on the location you're in and the policies of the store.
When replacing the Toyota key fob, you'll need to make use of OEM parts to ensure proper fit and performance. You should buy the part directly from the manufacturer since it is made to fit your vehicle model and year and meets strict safety standards.
Replace the battery
If the battery in your car has gone out of service or you notice a delay in the response of your key fob to a button press It could be time to replace one. A new battery should eliminate the slowness and give your car a better chance of starting in the winter or following an overnight stay at an outdoor parking spot. Follow these simple steps to replace the battery.
Close the hood, shut off the engine and then set the parking brake. Locate the battery, which is typically placed on a tray at the front of the engine bay. There are two terminals where cables are connected two terminals - one black (negative) and one in red (positive).
Use a wrench on the bolt that is tightening the negative cable connector at the battery terminal. Then, remove the cable and the terminal. Make sure you don't drop the battery that could cause it to leak or explode. Place the battery aside, making sure not to scratch the electrical wiring or any other parts in the engine bay.
Before putting in your new battery, make sure you also apply anti-corrosion spray on the terminals of the battery as well as the tray for your battery. This will help to stop corrosion and help prolong the life of your battery.
Find the clamp or mounting plate that secures the battery once you are ready to mount it. The positive terminal of the battery must match the positive terminal on the clamp or mount. Then, lower the battery into the tray, then reattach the clamp or mounting.
Repeat the process for the negative battery terminal. Make use of a wirebrush to clean the connectors, terminals and clamps on the battery tray. Spray the anti-corrosion solution onto the positive and negative terminals of your battery to extend its lifespan.
Replacing the Key Fob
The key fob allows you to unlock or lock your vehicle with just a pressing of a button. However, if the battery is dead or the fob is damaged in any way, it can be difficult to get it to work properly again. It's easy to replace the fob at home. Here's how:
The first step is to take your key from the fob. There should be a little slot or notch that the key's metal part fits into, and it's a good idea to have a small flat tool with you like a screwdriver or coin to help pry open the case. Older Toyota fobs could include a detachable key can be used to accomplish this, while newer models are designed to be opened by inserting the key into a notch on the case.
Once the case is open then locate the board and note how the battery is situated (it's ideal to snap a photo using your phone to use as a reference). Then, take out the battery from the case and replace it with a fresh one. Refer to the owner's manual or our service center for help when you're not sure of the kind of battery that your Toyota fob needs.
After you have put in the new battery, be sure to close the case and then test your Toyota fob to confirm that it is working. If it doesn't, you can always open the case to ensure that the battery is installed properly and that all the connections are in good order.
If everything is in order, you're ready to drive your Toyota with confidence again! If your key fob doesn't work after replacing it It's an ideal idea to call our service department to have an inspection and repair. Our team is available to help with all your automotive requirements! We can assist you with your automotive needs whether it's a replacement key fob or a transponder chip. Give us a call today to schedule an appointment! We look to working with you.
Replacing the Transponder Chip
A majority of modern cars contain transponder chips which communicate with the vehicle's immobilizer system. This prevents unauthorized access to the vehicle and its engine. The transponder chip will need to be replaced when you lose your keyfob or if it ceases to function. This can be done by a locksmith, or at the dealership. A professional locksmith is more likely to have the appropriate tools for the job.
First, find first, locate key replacement toyota and get it duplicated by a locksmith in your area. They will have the right equipment and can do it cheaper than the dealership. You'll require a master-key in order to program the new key. You can usually get these keys from a dealer, a locksmith or even online.
The chip in Toyotas is secured by a split pin, which can only be accessed by bending the key half-extended. You can use a screwdriver or whatever you have to slowly remove the plastic from the inside of the key. YouTube has a variety of videos that can help you. Once the transponder is removed, tape it temporary. Then, place the key that has the chip removed back into the housing and clamp it down tightly. Use super glue to close the cuts if needed.
Insert the master key in the ignition cylinder but do not turn. Depress and release the gas pedal six times within 20 seconds of doing this. The security light will flash to indicate that the key is registered.
Then, you can replace the battery in your new key fob and test it to ensure that it works correctly. If it's still not working then open the case and make sure that the battery is working and there are no connections. If you're still having issues contact a locksmith that is specialized in replacing keys for cars to get a better solution. USA Lock & Key is one such business that can offer fast and efficient Toyota key replacement services.